Micro signal：
-
National service hotline
- 400-082-1188
- What should be the frequency of cleaning the shelves in the fresh food area
- What is the flexibility of the combination of steel and wood shelves
- What are the difficulties in the craftsmanship of convenience store cash registers
- How to adjust the temperature of the shelves in the fresh food area
- What are the layout techniques for steel and wood shelves
What are the advantages of single-sided shelves against walls in terms of space utilization
source：www.cppbug.com | Release time：2025年09月03日1. Release the core ground flow line and adapt to the efficiency requirements of pedestrian flow in "small spaces"
Convenience stores, community supermarkets, and other scenarios generally have limited areas (such as 20-80 square meters), and the smoothness of customer flow (walking paths) directly affects the shopping experience and floor area efficiency.
The "wall mounted installation" feature of single-sided shelves against the wall can fully fit the shelf body to the wall without occupying the core walking area in the middle of the ground:
Compared to the middle island rack and four-way rack, which require space in the center of the ground, the wall rack only "attaches to the wall", and the ground only needs to reserve a "1-1.2m pickup channel in front of the shelf", which can keep the width of the middle moving line at 1.5-2m (to meet the parallel needs of two people), avoiding crowd congestion caused by shelf occupation;
Especially suitable for narrow and elongated convenience stores (such as those facing the street with narrow faces and wide areas), it can create a clear partition of "wall display area+middle circulation area" in the ground space, ensuring display capacity without compressing the space for customers to walk and choose.
2. High utilization rate of vertical space, breaking through the limitation of "insufficient ground area"
The core of space utilization in retail scenarios is to "demand capacity from high altitude", and single-sided shelves against walls are efficient carriers for vertical space utilization:
Strong height adaptability: The height can be customized according to the store floor height (usually 2.8-3.5m for convenience stores) (commonly 1.8-2.8m). The vertical area from the ground to below the ceiling can be designed in layers (such as 4-6 floors), used to display light and small items such as snacks, daily necessities, stationery, or to store inventory on the upper layer and sell heat on the lower layer, increasing the utilization rate of the vertical area on the wall to over 80% (traditional low shelves only use areas below 1.2m, which wastes a lot of vertical space);
Flexible adjustment of shelves: The height of each partition can be adjusted as needed (placing 30cm high beverage bottles on the lower layer and 10cm high snack boxes on the upper layer), avoiding vertical space gaps caused by differences in product height and achieving "one layer, one adaptation, no wasted space".
3. Utilize unused areas on the wall to avoid "waste of space resources"
If the store wall is not utilized, it will become an "idle blank area", while single-sided shelves against the wall can transform the wall into a "functional display area", achieving "wall value activation":
Without the need to occupy additional floor area, simply fix it to the wall with expansion screws, buckles, etc., and transform the originally "useless" wall surface (such as the wall next to the cash register or on both sides of the store) into an area that can display 200-500 items, especially suitable for scenarios where the floor is already filled with core categories but still needs to supplement display capacity;
Partial wall mounted shelves can be paired with accessories such as "wall hooks" and "side mesh baskets". Hanging displays (such as umbrellas, plastic bags, and small packaged snacks) can be added to the side and upper walls of the shelves to further explore the "corner space" of the wall and achieve "three-dimensional space utilization".
4. Reduce spatial interference and adapt to the needs of "partitioned display" and "inventory replenishment"
The "single-sided display+wall mounted design" of single-sided shelves against the wall can reduce interference with other spatial functions and optimize display and operational efficiency:
Not affecting other display areas: Due to its close proximity to the wall, the shelves are only "single-sided outward" (facing the flow line side), and do not require "reserved channels on both sides" like four-way and double-sided shelves. It can be compactly arranged near the wall (such as the distance between adjacent wall shelves only requiring reserved pickup channels), avoiding space waste between shelves, especially suitable for "shops surrounded by multiple walls" (such as square convenience stores). Wall shelves can be set up on the east, west, and north walls respectively, forming an efficient layout of "three sided display and middle flow line";
Easy integration of "display+inventory": The back of the shelf is closely attached to the wall, and a "hidden inventory space" (such as placing unopened product boxes) can be reserved under the shelf shelves and on the back (not affecting the pickup area). Employees do not need to frequently go to the back-end warehouse to replenish inventory, and inventory replenishment will not interfere with customer flow (only need to operate on the back of the shelf), balancing the space requirements of "display" and "inventory turnover".
Prev:
Why is the cost-effectiveness of steel and wood s…
Next:
Where are the main popular places for IKEA tobacc…
【Related article】
Suzhou Giant Commercial Equipment Co., Ltd
official account
applet
wechat
contact
phone